Transfer case shift motor/actuator (electric-shift models) — replacement
1. Raise the vehicle and place it securely on jack stands.
2. Remove the stone shields from below the transfer case.
3. Unplug the shift motor electrical connector.
4. Unscrew the retaining bolts and remove the electric shift motor/actuator assembly (see illustration).
6.4 Disconnect the electrical connector and remove the electric shift motor bolts
5. Inspect the seal for damage and replace it if necessary.
6. Position the gasket and the shift motor in place on the transfer case and install the bolts. Tighten the shift motor retaining bolts to the torque listed in this Chapter’s Specifications.
7. Installation is the reverse of removal.