Fender liner — removal and installation

1. Loosen the lug nuts to the front wheel on the side you’re going to work on.

2. Raise and support the vehicle securely on jack stands, then remove the wheel.

3. Remove the two screws securing the lower rear paint protector trim plate.

4. Remove the screws that secure the fender liner to the fender and inner body (see illustration).

17.4 Fender liner screw locations

Chevrolet Silverado Body _ Fender liner - removal and installation _ Fender liner screw locations

5. Pull down on the lower inside edges of the liner and pull it away from the fender. Then, carefully warp the liner enough to remove it from the wheel well.

6. Installation is the reverse of removal.

  • Pages

    open all | close all