Steering column covers — removal and installation
Warning: The models covered by this manual are equipped with a Supplemental Restraint System (SRS), more commonly known as airbags. Always disable the airbag system before working in the vicinity of any airbag system components to avoid the possibility of accidental deployment of the airbags, which could cause personal injury (see Chassis electrical system).
1. If equipped with a tilt-column, remove the tilt lever knob by pulling it straight out from the column (see illustration).
30.1 A quick but firm pull will remove the tilt lever from the steering column
2. Gently pry the upper and lower halves of the steering column apart with a flat bladed trim tool or equivalent (see illustrations).
30.2a Removing the upper steering column cover
30.2b Removing the lower steering column cover
3. Installation is the reverse of removal.