Instrument cluster — removal and installation
Warning: The models covered by this manual are equipped with a Supplemental Restraint System (SRS), more commonly known as airbags. Always disarm the airbag system before working in the vicinity of any airbag system component to avoid the possibility of accidental deployment of the airbag, which could cause personal injury (see Airbag system — general information and precautions).
1. Remove the instrument cluster hood trim panel and the instrument panel trim (see Body).
2. Remove the instrument cluster retaining screws (see illustration).
11.2 To detach the instrument cluster from the instrument panel, remove these four screws
3. Pull out the cluster, disconnect the electrical connector (see illustration) and remove the cluster.
11.3 Pull out the cluster, depress the release tab and disconnect the electrical connector from the cluster
Caution: Replacing the instrument cluster requires programming. See the appropriate repair facility for programming.
4. Installation is the reverse of removal.